4AGE Oil Cooler Delete Kit

$16.00

Get rid of your feeble stock oil cooler and bulky oil filter bracket!

The stock oil cooler on AW11 MR2 and AE82, AE86, AE92 Corolla is pretty close to useless (it only cools a little bit of the oil, and only at high RPM), and the bypass valve / bracket assembly that the oil filter mounts on is awkward and bulky. This kit lets you easily eliminate the stock oil filter bracket and mount the filter directly against the engine block, freeing up space for a more effective solution.

The supplied threaded union has a 3/4"-16 thread, allowing you to use a 25mm/1" sandwich plate (Trans-Dapt 1313, Derale 25770, or similar) to plumb oil lines to an aftermarket oil cooler, or you can run a relocator and put a remote filter elsewhere if you prefer.

Kit contents:
- Toyota oil filter union 90404-19001
- M12 oil return line plug
- Rubber-coated aluminum crush washer for plug

This kit is included with the EX140S stainless steel header.

Installation instructions are available here:
https://sv3power.com/wp-content/uploads/2015/09/Oil-Cooler-Delete-Instructions.pdf

Add to Cart:

  • Model: EL900K


This product was added to our catalog on Monday 22 February, 2016.

Your IP Address is: 207.241.237.224
Copyright © 2016 SV3Power Products. Powered by Zen Cart
Design by Interactive Business Solutions Co.